 |
 |
 |
 |
 |
 |
 |
- Home |
- Request Info |
- Log In |
- Site Map |
- Contact
|
|||||||||||||||||||||||||||||||||||||||||||||
|
|
||||
|
 |
|
 |
|
|
||||
    |
||||
|
||||
|
||||
At SkyBitz, we're experts at deploying the best power management systems in the industry. The proprietary, patented GLS platform gives us the ability to extend our battery life longer. And we have three different power management solutions. So no matter what your power requirements are—from reporting once a day to once every thirty minutes—SkyBitz offers a power management solution that works for you.
Our GLS Platform is so sophisticated that it enables us to produce the longest battery life available anywhere from standard "AA" lithium batteries. The Internal Battery Pack comes standard with the Mobile Terminal and requires one battery pack, which consists of eight "AA" lithium batteries.
|
Back to Top |
The Auxiliary Battery Pack is mounted inside the trailer and connected via a cable to the Mobile Terminal. The addition of the Auxiliary Battery Pack allows the user to increase the frequency of reports and/or paging intervals while maintaining long battery life.
Specifications for the Auxiliary Battery Pack
| Power/Capacity | 7.2 Volts / 19AMP HRS |
|
|
| Dimensions: | 4.5 x 3.2 x 1.5 inches |
|
|
| Weight: | 12 oz |
|
|
| Temperature: | -40 to +60 deg C |
|
|
| Vibration: | 2 G rms, MIL-STD-810D, Method 514.4 |
|
|
| Shock: | 30 G, MIL-STD-810D, Method 516.3, Procedure I |
|
|
| Salt Fog: | N/A |
|
|
| Humidity: | 0 to 95%, non-condensing |
|
|
| Water Immersion: | N/A Splash Resistant |
|
|
| Mounting | Bonded to the Front Inside Trailer Wall with 3M VHB Tape |
|
|
| Control I/O | N/A |
|
Back to Top |
Auxiliary Battery Pack
The SkyBitz External Power Module allows you to power the Mobile Terminal from vehicle power when a trailer is tethered to a tractor. The intelligent power system of the Mobile Terminal will automatically revert to its internal battery and your defined power conservation configuration when vehicle power is unavailable.
As an additional feature, the External Power Module will monitor and log when a trailer is tethered or untethered, and it can be configured to electronically alert you of a status change.
Specifications for the External Power Module and Trailer Tether Sensor
| Functions | External power supply for Mobile Terminal Trailer Tether/Un-tether sense Door switch interface |
|
|
| Input | 9-36VDC from tractor |
|
|
| Output | 6VDC power to Mobile Terminal - Provides "Tether" Status |
|
|
| Internal Power | Power for Door Switch function - Internal Battery Pack of 3 "AA" Lithium Primary Cells |
|
|
| Dimensions: | 2.5" x 5" x 1" |
|
|
| Weight: | 1 lb |
|
|
| Operating Temperature: | -40 Deg C to 70 Deg C |
|
|
| Storage Temperature | -55 Deg C to 85 Deg C |
|
|
| Vibration: | 2 G rms, MIL-STD-810D, Method 514.4 |
|
|
| Shock: | 30 G, MIL-STD-810D, Method 516.3, Procedure I |
|
|
| Salt Fog: | General Motors Engineering Standards Corrosion Test GM-9505P for a duration of five weeks |
|
|
| Humidity: | 100% Condensing |
|
|
| Water Immersion: | 1 Meter, 30 Minutes |
|
|
| Interface | J560 Pin 7 - Aux power or Pin 5 - Marker lights |
|
|
| Mounting | Bonded to the Trailer Roof with 3M VHB Tape |
|
Back to Top |
External Power Module and Trailer Tether Sensor